You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Cobra 2814 1700KV Brushless Motor

Quick Overview

Cobra 2814/10 1700KV brushless motor with mounting accessories included.

Availability: Out of stock



Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2814 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 2814 Series Motor is a complete accessory package which contains the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing

Cobra 2814/10 Motor Specifications
 Stator Diameter  28.0 mm (1.102 in)
 Stator Thickness  14.0 mm (0.551 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  10 Turn Delta
 Motor Kv Value  1700 RPM per Volt
 No Load Current (Io)  2.06 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase  0.036 Ohms
 Motor Resistance (Rm) Phase to Phase  0.024 Ohms
 Maximum Continuous Current  48 Amps
 Max Continuous Power (3-cell Li-Po)  530 Watts
 Max Continuous Power (4-cell Li-Po)  700 Watts
 Motor Weight  109 grams (3.84 oz.)
 Outside Diameter  35.0 mm (1.378 in.)
 Shaft Diameter  5.00 mm (0.197 in.)
 Motor Body Length  34.1 mm (1.343 in.)
 Overall Shaft Length  54.0 mm (2.126 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8 KHz

Additional Information

Manufacturer Cobra
Motor Size 2814
KV 1700
Motor Weight 109g

Also Purchased