You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Angry Beez FX799T 200mw 40 CH Video Transmitter

Quick Overview

FX799T 5.8 GHz 40 Channel 200mW Race Transmitter

Normal SMA
w/ Straight SMA Pigtail
w/ Right Angle SMA Pigtail
Product Name Price Qty

Angry Beez FX799T 200mw 40 CH Video Transmitter

Angry Beez FX799T 200mw

Regular Price: $34.99

Special Price $29.99

Angry Beez FX799T 200mw 40 CH Video Transmitter

Angry Beez FX799T 200mw w/ Straight SMA Pigtail

Regular Price: $34.99

Special Price $29.99

Angry Beez FX799T 200mw 40 CH Video Transmitter

Angry Beez FX799T 200mw w/ Right Angle SMA Pigtail

Availability: In stock


The FX799T Mini 200mW 5.8GHz 40CH FPV video transmitter is the perfect VTX for FPV racing! The lower 200mW transmission power means more pilots can fly together without overpowering each other on close frequencies. The FX799T has 40 channels including the new Raceband frequencies. Our friends from ImmersionRC first divided the 5.8 band into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an on-board microphone to transmit audio to your receiver.

The FX799T features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 7.5g! It stays cool to the touch during operation, so you don't have to worry about it overheating in a crash.


  • 40 channels: Covers 5 Bands
  • Intuitive and easy to use button and LEDs for frequency selection
  • Provides 5v power output for FPV cameras
  • Small sized and light weight
  • Transmitter frequency: 5658-5925MHz with 200mW power output
  • Transmitting distance >  1000m (open area)
  • SMA Antenna connector
  • Dimensions: 32*22*9mm (not including SMA adapter)
  • Audio: Includes on board microphone
  • Optional SMA Pigtail Length: 10cm


  • Operating Voltage: 7 - 20V
  • Supply current: 50 mA
  • Operating Temperature: -10 +85 C
  • Video Band Width: 5-6 MHz
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Level: 0.8,1.0,1.2 Vp-p
  • Video Input Impedance: 75 Ohm
  • Audio Input Level: 0.8 ,2.0 Vp-p
  • Audio Input Impedance: 10K Ohm
  • Weight: 7.5g (without antenna)
  • Antenna Connector: SMA Female Connector
  • Video Format: NTSC/PAL
  • Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR

Additional Information

Manufacturer FX
VTX / RX Video Transmitter
Frequency 5.8 GHz
FPV Channels 40
VTX Power 200mW
SMA Connector Type SMA

The use and operation of this type of product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. FPVHQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. 

Learn more about HAM licenses.