+1 831 204 7780 | CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Matek RGB LED WS2812B W/ MCU

Quick Overview

Matek RGB LED WS2812B W/ MCU

Availability: In stock

$7.99

Details

It comes as a single stick with 8 individually addressable RGB LEDs & STM MCU assembled. It provides dual control modes, can be used for decorating the FPV Quad-rotors.

Features

  • Built-in Bpcs RGB LED WS2812B & 1pc MCU
  • Dual modes:MCU control & Cleanflight control
  • MCU mode: 7 colors (White, Green, Red, Blue, Yellow, Cyan, Magenta)
    • 4 status (Constant light, Slow flash , Fast flash , Voilent flash)
  •  CF mode: support CC3D, Naze32, SPRacingF3 , etc. with CleanFlight firmware
  • Working voltage range: 4.5- 5.2V DC
  • Power of MCU mode (5V IN): White: 1.8W /0.36A
    • Green/Red/Blue: 0.6W/0.12A
    • Yellow/Cyan/Magenta: 1.2W/0.24A
  • Mounting: 30mm, ct>2.6mm
  • Size & Weight: 65x10mm , 3g

How to Use

  1. Connect the LED strip to 5V power source (Pin 5V & GND).
  2. Press the button, scroll through the color within White, Green, Red,Blue, Yellow, Cyan, Magenta.
  3. Hold the button 2s to enter the setting of LED mode, then press thebutton to set it within
    1. MCU mode(the 1stLEDConstant light,Slowflash,Fast flash,Voilent flash)
    2. CFmode(the1stLEDOFF)
  4. Themodewill be saved if no actionwithin10seconds.
  5. IfMCU modeis selected&saved,thecolorcanbe altered bypressing the button.
  6. IfCFmode isselected&saved,Pisconnectthe DIN to the FlightController.
    1. CC3D:Pin Motor-5
    2. Naze32: RC5 pad
  7. SPRacingF3: LED_STRIPpad
    * Pis setthe LEDstatus inGUIaccording toCleanFlightguide.
  8. If the LEDstatus is garbledwhensettingCF mode toMCUmode,pis movethe DIN&re-energizeit.

Additional Information

Manufacturer Matek